OKULEN® 500 - green - FN6000

OKULEN® 500 is a high molecular low pressure polyethylene with a molecular weight of approx. 500.000 g/mol. (HMW-PE)

Properties:

• EU1935/2004 - conform
• EU10/2011 - conform
• FDA - conform

food-grade

Colour:

green FN6000 / simillar RAL6024

 
Characteristics and standard values
Properties
Method
Unit
OKULEN® 500 - green - FN6000
Physical properties      
 Molecular-weight k.a. Mio. g/mol. ~ 0.5
 Density DINENISO 1183-1 (09/2019)
ASTM D792
g/cm³ > 0.950
 Notched impact strength DINENISO 21304-2 (04/2021) kJ/m² > 15
 Abrasion-Index (Sand-Slurry) DINENISO 15527 (05/2022) 360 - 440
 Tensile strength at yield (1B - 50mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
N/mm² > 26
  --- ---
 Elongation (Break / 1B - 50mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
% > 350
 Tensile-E-modulus (1B - 1mm/Min.) DINENISO 527-2 (06/2012)
ASTM D 638 (2010)
N/mm² > 1000
  --- ---
 Static Friction ASTM D 1894 (2014) ~ 0.15 - 0.22
 Dynamic Friction ASTM D 1894 (2014) ~ 0.10 - 0.15
 Shore-D-Hardness, 3 sec. value 6 mm plate DINENISO 868 (10/2003) D 65 - 67
 Ball indentation hardness DINENISO 2039 N/mm² ~ 50
 Water absorption DINENISO 62 (05/2008) % < 0.01
Thermal properties      
 Melting Point (DSC) DINENISO 11357-1 (03/2010) °C 133 - 136
 Thermal Conductivity Wire method W/m*K ~ 0.41
 Max. operation temperature Literature °C 80
 Coefficient of thermal expansion (23 - 80°C) ISO 11359 mm/mm °C ~0.00015 - 0.00020
Electrical properties      
 Volume resistivity DINEN 62631-3-1 (01/2017) Ohm*cm > 1.0E+14
 Surface resistivity DINEN 62631-3-2 (10/2016) Ohm > 1.0E+13
 ATEX-Directive - TÜV approved! ATEX-Directive ---
 ESD-D --- Ohm ---
Burning properties      
 Fire resistance (Self-classification) DIN 4102 Klasse B2
 Fire resistance (Self-classification) UL94 Klasse HB
Physiological properties      
 Food compliant EU/FDA
The above data are based on the present knowledge and are given without guarantee. Existing laws and conditions are to be respected by the user of our products. The decision about the suitability of a material for a certain application must be made by the user. We reserve the right to alter the indicated data. The indicated values are for a 15 mm thick sheet.
 
 
 
 
Copyright © 2024 OKULEN® all rights reserved.